Fideo
Cais
Deunyddiau Perthnasol O Torrwr Laser Ffibr
Torri Laser Ffibr dur di-staen, dur carbon, dur ysgafn, dur aloi, dur galfanedig, dur silicon, dur gwanwyn, dalen titaniwm, dalen galfanedig, dalen haearn, taflen inox, alwminiwm, copr, pres a dalen fetel arall, plât metel, metel pibell a thiwb, ac ati.
Diwydiannau Perthnasol O Ffeibr Laser Cutter
Defnyddir torrwr laser ffibr yn eang ar gyfer llawer o ddiwydiant, megis, dodrefn, rhannau peiriannau, trydan, gwneuthuriad metel dalen, cabinet trydanol, llestri cegin, panel elevator, offer caledwedd, amgaead metel, llythyrau arwydd hysbysebu, lampau goleuo, crefftau metel, addurno, gemwaith, offerynnau meddygol, rhannau modurol a meysydd torri metel eraill.
Sampl
Cyfluniad
* Mae cyfnewid cyflym rhwng dau lwyfan yn gwella effeithlonrwydd gwaith yn fawr.
* O dan echdynnu bwrdd.
* Cywirdeb lleoli ac ail-leoli 0.02mm.
* ffynhonnell laser mewn 1000W, 1500W, 2000W, 3000W, 4000W, 6000W - Hyd oes 100,000 awr.
* Pen laser trachywiredd y Swistir Raytools.
* Ball sgriw gyrru system rheilffordd canllaw.
* Gyriant modur servo Fuji Japaneaidd.
* Rheiliau canllaw Taiwan Hiwin.
* Almaeneg Schneider Electronics.
* Meddalwedd CypCut gan gynnwys gallu nythu - cynhyrchiant sefydlog ac effeithlon.
* System oeri dŵr a echdynnu wedi'i chynnwys.
Paramedrau technegol
| Model | Cyfres KE |
| Tonfedd | 1070nm |
| Maes Gwaith | 3000*1500mm / 4000*2000mm / 6000*2000mm/ 6000*2500mm |
| Pŵer Laser | 1000W / 1500W / 2000W / 3000W / 4000W / 6000W / 8000W |
| Cywirdeb Lleoliad Echel X/Y | 0.03mm |
| Cywirdeb Ail-leoli Echel X/Y | 0.02mm |
| Max.Cyflymiad | 1.5G |
| Max.cyflymder cysylltu | 140m/munud |
Torri paramedrau
| Paramedrau Torri | 1000W | 1500W | 2000W | 3000W | 4000W | |
| Deunydd | Trwch | cyflymder m/munud | cyflymder m/munud | cyflymder m/munud | cyflymder m/munud | cyflymder m/munud |
| Dur carbon | 1 | 8.0--10 | 15--26 | 24--32 | 30--40 | 33--43 |
| 2 | 4.0--6.5 | 4.5--6.5 | 4.7--6.5 | 4.8--7.5 | 15--25 | |
| 3 | 2.4--3.0 | 2.6--4.0 | 3.0--4.8 | 3.3--5.0 | 7.0--12 | |
| 4 | 2.0--2.4 | 2.5--3.0 | 2.8--3.5 | 3.0--4.2 | 3.0--4.0 | |
| 5 | 1.5--2.0 | 2.0--2.5 | 2.2--3.0 | 2.6--3.5 | 2.7--3.6 | |
| 6 | 1.4--1.6 | 1.6--2.2 | 1.8--2.6 | 2.3--3.2 | 2.5--3.4 | |
| 8 | 0.8--1.2 | 1.0--1.4 | 1.2--1.8 | 1.8--2.6 | 2.0--3.0 | |
| 10 | 0.6--1.0 | 0.8--1.1 | 1.1--1.3 | 1.2--2.0 | 1.5--2.4 | |
| 12 | 0.5--0.8 | 0.7--1.0 | 0.9--1.2 | 1.0--1.6 | 1.2--1.8 | |
| 14 |
| 0.5--0.7 | 0.8--1.0 | 0.9--1.4 | 0.9--1.2 | |
| 16 |
|
| 0.6-0.8 | 0.7--1.0 | 0.8--1.0 | |
| 18 |
|
| 0.5--0.7 | 0.6--0.8 | 0.6--0.9 | |
| 20 |
|
|
| 0.5--0.8 | 0.5--0.8 | |
| 22 |
|
|
| 0.3--0.7 | 0.4--0.8 | |
| Dur di-staen | 1 | 18--25 | 20--27 | 24--50 | 30--35 | 32--45 |
| 2 | 5--7.5 | 8.0--12 | 9.0--15 | 13--21 | 16--28 | |
| 3 | 1.8--2.5 | 3.0--5.0 | 4.8--7.5 | 6.0--10 | 7.0--15 | |
| 4 | 1.2--1.3 | 1.5--2.4 | 3.2--4.5 | 4.0--6.0 | 5.0--8.0 | |
| 5 | 0.6--0.7 | 0.7--1.3 | 2.0-2.8 | 3.0--5.0 | 3.5--5.0 | |
| 6 |
| 0.7--1.0 | 1.2-2.0 | 2.0--4.0 | 2.5--4.5 | |
| 8 |
|
| 0.7-1.0 | 1.5--2.0 | 1.2--2.0 | |
| 10 |
|
|
| 0.6--0.8 | 0.8--1.2 | |
| 12 |
|
|
| 0.4--0.6 | 0.5--0.8 | |
| 14 |
|
|
|
| 0.4--0.6 | |
| Alwminiwm | 1 | 6.0--10 | 10--20 | 20--30 | 25--38 | 35--45 |
| 2 | 2.8--3.6 | 5.0--7.0 | 10--15 | 10--18 | 13--24 | |
| 3 | 0.7--1.5 | 2.0--4.0 | 5.0--7.0 | 6.5--8.0 | 7.0--13 | |
| 4 |
| 1.0--1.5 | 3.5--5.0 | 3.5--5.0 | 4.0--5.5 | |
| 5 |
| 0.7--1.0 | 1.8--2.5 | 2.5--3.5 | 3.0--4.5 | |
| 6 |
|
| 1.0--1.5 | 1.5--2.5 | 2.0--3.5 | |
| 8 |
|
| 0.6--0.8 | 0.7--1.0 | 0.9--1.6 | |
| 10 |
|
|
| 0.4--0.7 | 0.6--1.2 | |
| 12 |
|
|
| 0.3-0.45 | 0.4--0.6 | |
| 16 |
|
|
|
| 0.3--0.4 | |
| Pres | 1 | 6.0--10 | 8.0--13 | 12--18 | 20--35 | 25--35 |
| 2 | 2.8--3.6 | 3.0--4.5 | 6.0--8.5 | 6.0--10 | 8.0--12 | |
| 3 | 0.5--1.0 | 1.5--2.5 | 2.5--4.0 | 4.0--6.0 | 5.0--8.0 | |
| 4 |
| 1.0--1.6 | 1.5--2.0 | 3.0-5.0 | 3.2--5.5 | |
| 5 |
| 0.5--0.7 | 0.9--1.2 | 1.5--2.0 | 2.0--3.0 | |
| 6 |
|
| 0.4--0.9 | 1.0--1.8 | 1.4--2.0 | |
| 8 |
|
|
| 0.5--0.7 | 0.7--1.2 | |
| 10 |
|
|
|
| 0.2--0.5 | |
